Need help?Do you have a question about the Nogueira SN-165 and is the answer not in the manual?
Details Nogueira's environmental commitment and proper disposal guidelines for used products.
Explains safety alert symbols, DANGER warnings, and CAUTION warnings.
Lists essential safety rules for operation, including PPE and hazard awareness.
Covers safe operation, maintenance, and awareness of moving parts.
Addresses safe operation on slopes and in various environmental conditions.
Details safe procedures for coupling, detaching, and transporting the machine.
Emphasizes compliance, first-aid readiness, and avoiding unauthorized modifications.
Explains labels related to manual reference and key removal before maintenance.
Covers labels warning about safe distances and avoiding contact with moving components.
Details labels for approaching stopped machines and coupling zones.
Explains labels for drum impact hazards and safe fluid handling.
Covers driveshaft safety, PPE, and noise protection labels.
Describes labels for RPM limits and power take-off direction.
States the machine's exclusive use for mowing specific plants for hay or silage.
Details coupling to three-point hitches and driveshaft length adjustment.
Explains adjusting hydraulic arms for correct drum alignment and parallel operation.
Outlines PTO disengagement and machine stability checks before operation.
Describes positioning, drum rotation check, and using locking pins.
Guides on assembling the safety device and placing the locking pin.
Ensures safety device, shields, and blades are checked before mowing.
Covers gear selection, blade condition, drum speed, and spring pressure.
Explains adjusting the third point for horizontal or slightly forward tilt.
Advises maintaining the mower on the higher side on slopes.
Details lifting, pin removal, and turning the machine for transport.
Describes lowering the support base and disengaging from the tractor.
Emphasizes disconnecting power, ignition, and using support for safe maintenance.
Advises checking gearbox cover screws and changing trim as needed.
Details safe blade replacement using the provided wrench and checking fastening.
Specifies checking blade holder pin diameter (7mm) and replacing if smaller.
Explains removing screws, shoe, and replacing the blade holder on each drum.
Details lubrication schedules for gearbox and daily points.
Describes checking V-belt tension and tightening nuts as needed.
Explains obstacle activation, response, and spring tension adjustment.
Lists detailed technical specifications for the SN-165 Drum Mower.
Provides a conversion table between inch and metric gauges for keys.
Lists torque values (N.m) for various gauge and resistance class/degree combinations.
Explains identifying the machine via serial number for support.
Advises providing serial number and model when contacting technical support.
Recommends using Nogueira genuine parts for compatibility and quality.
Outlines the warranty terms, duration, coverage, and conditions for the machine.
Provides step-by-step instructions for registering the TERM OF DELIVERY and sales invoice online.
Owner's declaration of receipt and acknowledgment of operator training.
General| Brand | Nogueira |
|---|---|
| Model | SN-165 |
| Category | Lawn Mower |
| Language | English |
To Next Page