To Next PageTo Next Page
Need help?Do you have a question about the Nokia Siemens Networks FAPr-hsp 5000 and is the answer not in the manual?
General| Brand | Nokia Siemens Networks |
|---|---|
| Model | FAPr-hsp 5000 |
| Category | Extender |
| Language | English |
Plug power and network cables into the device and the broadband router.
Plug the power supply into the main socket.
Wait for the green light to stop flashing, indicating the device is ready.
Contact operator if the green light does not stop flashing after 30 minutes.
Log on to http://www.nokiasiemensnetworks.com/manuals for the full manual.
Lists the items included: 3G Access Point, Ethernet cable, and Main power supply.
Defines the meaning of front-mounted LED states (Green, Red, Off).
Details the Reset, Power Port, and ETH Port functions on the rear panel.
The FAP supports up to eight mobile devices for voice or data sessions.
Recommended minimum speeds are 2Mbps downlink and 512kbps uplink.
Typical range for making calls is between 50m and 100m.
Handset displays the FAP name when connected to the Femtocell Access Point.
Verify 3G capability, check settings, and confirm mobile/SIM registration.
New mobile phones or SIM cards need to be registered with the FAP.
Consult the 'LED' chart in the document for flashing light explanations.
Yes, calls can be made while sending emails or uploading files.
Move the FAP farther away from the router if Wi-Fi connectivity issues arise.
Transmits less than a broadband router, up to 20mW.
Uses approximately the same amount of electricity as a broadband router.
