8
Note:
In Windows NT 4.0, if you want to connect to a wireless LAN
when logging onto a domain, insert the wireless LAN card into
your computer and switch on the computer, then wait until the
small Nokia C110/C111 icon appears in the bottom right corner of
the screen. After that you can type your username and password.
20
The Welcome window of the Profile Wizard opens. Click Next.
21
Give a name for the profile. You can also enter a description of the profile.
Click Next.
22
Select the appropriate operating mode. Click Next.
23
Type the network name or select one from the list. Then select either
Automatic channel selection or set the correct channel manually. Click Next.
24
Select the Obtain an IP address from a DHCP server option. If needed,
you can configure the IP address, subnet mask, default gateway, and
advanced TCP/IP settings manually.
Select the Log on to domain option if you want your computer to log on to
a specified domain when using the profile.
Type the name of a workgroup in the Workgroup box if you want your
computer to join one. Click Next.
25
The summary of the configured settings is displayed. To accept them,
click Finish. To change the settings, click Back, make the changes, and
then click Finish.
Note:
The new profile will not be activated automatically. To
activate the profile, you must select it from the list of profiles and
click Apply.
For the latest product information, please see the readme.txt file on the CD-
ROM.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
