Organizer
61
Lap timing—You can use the Lap time function when you want to track how
long it takes to complete each cycle or lap. Select Lap to note the lap time.
The clock stops, then immediately from zero. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list.
2. Select Stop to end timing and display the total time.
Save, view, or delete times
To save a time while the clock is running, select Stop > Options > Save, enter a
name for the measurement, and select OK. If you do not enter a name, the total
time is used as the default title for the lap or split time.
To view the last measured time, select Menu > Organizer > Stopwatch > Show
last time.
To browse saved times, select Menu > Organizer > Stopwatch > View times.
To delete a saved time, select Menu > Organizer > Stopwatch > View times.
Select the time you wish to delete and Options > Delete times. Select OK at
Delete?
To delete saved times, select Delete all or One by one.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and appears in the upper left corner of the screen.
To return to the stopwatch screens, do the following:
1. Select Menu > Organizer > Stopwatch > Continue.
2. To stop the clock, select Stop.
N1315_UG_EN_Non-RUIM_Vivo_FCC_0804.fm Page 61 Friday, August 4, 2006 6:02 PM
To Next Page
Loading...
