Nokia 2730 classic
RM-578 / RM-579
Service Manual Level 1&2
13
Confidential
Copyright © 2009 NOKIA
All rights reserved
Version 1.0
ISSUE 1
7) Remove the A-COVER ASSY. 8) Separate the KEYMAT ASSY from the A-COVER by
pressing the keymat lightly. When the keymat is
separated protect both sides of the window with
protective film to avoid scratches.
9) Protect the LCD with protective film. 10) Nokia 2730: Unscrew the four TORX+ size 6
screws in the order shown. Do not use them again.
11) Release the clips holding the UI SHIELDING ASSY
with the SS-93. Then lift up the assy as shown in the
small picture.
12) Remove the UI SHIELDING ASSY and the LIGHT
SWAP PWB.