Management using the Web UI Nokia FastMile 4G Receiver Product Overview
98 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT
DRAFT
• Configuration of Access Points (up to one default AP in router mode and up to
four APs in bridge mode; a total of five APs can be configured). AP configuration
includes configuration of:
• AP name
• forwarding mode (router or bridge)
• Username
• Password
• VLAN
• MTU size
• subnet mask
• Note that the default APN cannot be deleted
• Configuration of cell list (up to nine cells can be configured)
• Configuration of the DHCP server for router mode
• Uploading of CA certificates
Note — CA certificates must be pre-downloaded to the laptop so
that they can be browsed and found via the 'Upload Certificate'
action. The CA Certificates must comply to the naming rules
required by the FastMile4G Receiver.
The following CA certificates are supported:
• logserverCA.pem (used for authenticating the log server)
• swserverCA.pem (used for authenticating the software upgrade server)
• diagserverCA.pem (used for authenticating the optional diagnostics server)
• acsCA.pem (used for authenticating the ACS)
Figure 51 shows an example of the Login screen.
To Next Page
Loading...
