9
route, tap +, and select the location in the same way as a destination. To delete a
stopover from the trip, tap the stopover on the list and .
After you have set up the route, tap and Routing. After the route has been
calculated, a route summary is displayed. To view a detailed waylist, tap the right
arrow. To view the waypoints on the map, tap the right arrow again. To move to
the previous or next waypoint, tap the arrow at the left or right side of the
waypoint name. To return to the previous screen, tap the left arrow.
Navigation settings
Press the menu key, and tap Navigator > Settings and one of the following:
• General settings — You can select, for example, a voice for navigation
instructions (VoiceSkin), the distance unit, and how the device reacts to TMC
messages (Automatic, Manual, or Off).
You can also set the device to show the location of speed/safety cameras on
your route during navigation, if this feature is enabled in your device. Some
jurisdictions prohibit or regulate the use of speed/safety camera location data.
Nokia is not responsible for the accuracy, or the consequences of use of such
data.
• Map settings — You can select, for example, the 2D or 3D view and toggle
between the night and day modes.
• Route settings — You can select, for example, the desired mode of
transportation and define the routing settings, such as allow or avoid
motorways.
■ Call handling
To connect the device to your phone using Bluetooth wireless technology, press
the menu key, and tap Phone > .
Call a saved contact
To call a contact that you have downloaded from your mobile phone, press the
menu key, and tap Phone > Contacts.
Enter the desired name using the displayed keypad. Tap or the name list. To
view the phone numbers saved with a name, tap the name. To call a phone
number, tap it.
To Next Page
Loading...
