Q: Why can’t I find my friend’s device while using Bluetooth
connectivity?
A: Check that both devices are compatible, have activated Bluetooth connectivity,
and are not in hidden mode. Check also that the distance between the two devices
is not over 10 meters (33 feet) and that there are no walls or other obstructions
between the devices.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can end the connection from
the other device or deactivate Bluetooth connectivity in your device. Select Menu >
Settings and Connectivity > Bluetooth > Bluetooth > Off.
Q: Why can't I see a wireless LAN (WLAN) access point even though I
know I'm within its range?
A: The WLAN access point may use a hidden service set identifier (SSID). You can
only access networks that use a hidden SSID if you know the correct SSID, and have
created a WLAN internet access point for the network on your Nokia device.
Q: How do I turn the wireless LAN (WLAN) off on my Nokia device?
A: The WLAN on your Nokia device turns off when you are not connected or trying
to connect to another access point, or not scanning for available networks. To
further reduce battery consumption, you can specify that your Nokia device does
not scan, or scans less often, for available networks in the background. The WLAN
turns off in between background scans.
To change the background scan settings:
1. Select Menu > Settings and Wireless LAN.
2. To increase the background scan time interval, adjust the time in Scan for
networks. To stop background scans, select Show WLAN availability >
Never.
3. To save your changes, select Back.
When Show WLAN availability is set to Never, the WLAN availability icon is not
shown in the home screen. However, you can still manually scan for available
WLAN networks, and connect to WLAN networks as usual.
© 2008 Nokia. All rights reserved. 143
To Next Page
Loading...
