86Copyright © 2005 Nokia. All rights reserved.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Adding and managing voice tags
Save or copy in the phone’s memory the contacts to which you want to add a
voice tag. You can also add voice tags to the names in the SIM card, but if you
replace your SIM card with a new one, you first need to delete the old voice tags
before you can add new ones.
Voice tags use shared memory, see Shared memory on page 15.
1. In standby mode, move the joystick down.
2. Scroll to the contact to which you want to add a voice tag and press Details.
Scroll to the phone number you want and press Options.
3. Select Add voice tag.
4. Press Start, and say clearly the word(s) you want to record as a voice tag. After
recording, the phone plays the recorded tag. A symbol appears after the
phone number with a voice tag.
To check the voice tags, press Menu and select Contacts and Voice tags. Scroll to
the contact with the voice tag that you want, and press Select to see the options
to listen to, delete or change the recorded voice tag.
Making a call by using a voice tag
In standby mode, press and hold the right selection key. A short tone is heard and
Speak now is displayed. Say the voice tag clearly. The phone plays the recognised
voice tag and then dials the phone number of the voice tag after 1.5 seconds.
To Next Page
Loading...
