96Copyright © 2005 Nokia. All rights reserved.
To select the settings for connecting to the service, select Menu > Push to talk >
Config. settings and from the following options:
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account contained in the active configuration
settings
PTT user name, Default nickname, PTT password, Domain, and Server address
To edit the PTT settings for use, select Menu > Push to talk > PTT settings.
To select the phone to allow the reception of incoming one-to-one calls, select 1
to 1 calls > On. To make but not receive one-to-one calls, select Off. The service
provider may offer some services that override these settings. To set the phone to
first notify you of incoming one-to-one calls with a ringing tone, select Notify.
To activate the listened groups, select Listened groups > On.
To set the phone to automatically connect to the PTT service when you switch the
phone on, select PTT status in startup > Yes.
To hide your PTT address from group and one-to-one calls, select Send my PTT
address > No.
To Next Page
Loading...
