Voice tags
54
the service technician, who installs your car kit, for
professional assistance.
To make the desired setting:
X With the display in standby, press to access the menu.
X Scroll to the Settings menu, and press to open it.
X Scroll to Equaliser settings, and press to select this
item.
X Scroll to Loudspeaker or Radio loudsp., and press to
select the desired option.
Restore factory settings
You can reset all of the menu settings to the original factory
settings.
X With the display in standby, press to access the menu.
X Scroll to the Settings menu, and press to open it.
X Scroll to Restore factory settings?, and press to select
this item
X Follow the instructions on the display.
Caution!
If you have erased a setting, you cannot undo this
operation. The data is irretrievably lost.
Voice tags
Before using voice tags or using voice
dialing, note that:
y Voice tags are not language dependent. They are dependent
on the speaker's voice.
y Voice tags are sensitive to background noise. Record voice
tags and use them in a quiet environment.
y You must say the name exactly as you said it when you
recorded it.
y Very short names are not accepted. Use long names, and
avoid similar names for different numbers.
Note
Using voice tags may be difficult in a noisy environment
or during an emergency, so you should not rely solely
upon voice dialing in all circumstances.
In the hands-free mode, the voice tags stored on the mobile
phone are used. Remember that they may differ from the voice
tags stored in the car kit.
To Next Page
Loading...
