45
Each time you use a feature that requires a feature
code, that code is sent to the network to verify you’re
using the correct feature code.
Note: If your phone has more than one phone number pro-
grammed, any feature codes stored will apply only to your
primary phone number, or NAM 1.
See “NAM selection” on page 44 for details on NAM.
Storing codes
1.
Press
Menu
4 4 5 (
Settings
-
Network services
-
Network feature setting
)
2.
At
Feature Code:
, enter the feature code or deacti-
vation code received from your dealer (e.g.
∗
21
∗
,
#21#, etc.), press
OK
3.
W
to the service that the code applies to and press
Select
4.
W
to suboption, then
Select
(Repeat step as
required, based on number of suboptions)
(Use step four only for call forwarding options)
5. W
to
Activate
or
Cancel
, then press
OK
Network services
Some of the features in this menu are network services
that require a subscription. See your service provider
for details and availability.
4-4-1
Voice privacy
-
See page 69
.
4-4-2
Call forwarding *
-
See page 21.
4-4-3
Call waiting *
-
See page 24
.
4-4-4
Send own number *
-
See page 59
.
4-4-5
Network feature setting
-
See page 44
.
4-4-6
NAM selection
-
See page 43
.
*
These features will not appear in the menu unless they are
activated using
Network feature setting. See “Network fea-
ture setting” on page 44 for details.
To Next Page
Loading...
