Nokia 6220 Classic - Position; Trip Meter

Copyright © 2008 Nokia. All rights reserved. 37
Positioning
natural obstacles, are ignored. Differences in altitude are
not taken into account when calculating the distance.
Route guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates. To clear the
destination, select Stop navigation.
Position
To save your location as a landmark, select >
Applications > GPS data > Position > Options > Save
position.
Trip meter
To activate trip distance calculation, select >
Applications > GPS data > Trip distance > Options >
Start. To deactivate it, select Options > Stop. The
calculated values remain on the display.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Reset. To set the odometer and total time to zero,
select Restart.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.