91Copyright © 2006 Nokia. All rights reserved.
PTT key default function is used to select the default action of the PTT-key. It can be set to opening the
Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other
contact, group or channel is highlighted) to a contact, channel or group.
Show my login status > Yes — to enable the sending of the login status
PTT status in startup > Yes > or Ask first — to set the phone to automatically connect to the PTT service when
you switch on the phone
PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network
Send my PTT address > No — to hide your PTT address from calls
To Next Page
Loading...
