©2001 Nokia Corporaton. All rights reserved.
Menu functions
82
• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network. You obtain the
access point name from your network operator or service provider.
• IP address - Key in the address, press for a period, and press OK. You obtain the IP address
from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Login type - Select Manual or Automatic. If you select Manual when the GPRS connection is set
to Always online, the Always online connection will be disabled.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you want to use are activated. To
activate the settings:
• Press Menu, select Services and Settings. Select Active service settings and scroll to the set you
want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu, select Services and Home.
Tip: To quickly open the homepage of a WAP service:
In standby mode, press and hold .
To Next Page
Loading...
