Nokia 6310i - Page 55

PAMS Technical Documentation 2 - Baseband System
NPL-1
,VVXH$SULO 1RNLD&RUSRUDWLRQ 3DJH
$EVROXWHPD[LPXPUDWLQJV$0'0ELW
$EVROXWHPD[LPXPUDWLQJV,17(/0ELW
7DEOH$EVROXWHPD[LPXPUDWLQJVIRU$0'0ELW
Parameter Rating Remarks
Supply voltage (V
cc
)
(operational voltage is: 1.7 –1.9)
-0,5 V to +4,0 Volt Minimum DC voltage on input or I/O
pins is -0.5 V
VPP and RESET -0.5 V to +12.5 Volt Minimum DC input voltage on pins
VPP, and RESET is -0.5 V
Output Short Circuit Current 100 mA No more than one output may be
shorted to ground at a time.
Duration of the short circuit should
not be greater than one second.
Voltage with Respect to Ground.
All pins except VPP and RESET
0.5 V to V
cc
+ 0.5 Volt Minimum DC voltage on input or I/O
pins is -0.5 V
7DEOH$EVROXWHPD[LPXPUDWLQJVIRU,17(/0ELW
Parameter Rating Remarks
Voltage on any pin (except Vpp,
Vpp)
-0.5V to +2.45V See reference for details
Vpp Voltage -0.2V to +14V
Vcc and Vccq -0.2V to +2.45V
Output short circuit current 100mA