Nokia 6310i - Quick Guide to Functions; Basic Operations Guide

3/3
1. INTRODUCTION
This guide briefly describes how to begin using Nokia Content Copier.
The Nokia Content Copier consists of the following features:
• Enables the copying of data between two Nokia phones (described later in this
document)
• Phone book (names and numbers), Caller Groups
• Profiles
• Ease of use items (I e Any key answer)
• Calendar
• WAP settings, Messages, Advanced Functions etc. depending on the phone model
used
• Sends back-up data on your Nokia phone to a PC, and then restores it to your phone
• Phone book (names and numbers), Caller Groups
• Profiles
• Ease of use items (I e Any key answer)
• Calendar
• WAP settings, Messages, Advanced Functions etc. depending on the phone model
used
• Erases data from your phone (only from the Nokia 6310i)
2. SYSTEM REQUIREMENTS
To install and run the Nokia Content Copier, you need:
• An Intel-compatible PC equipped with Windows 98/ME/ 2000/XP, Windows NT 4 with
SP 5 or later (only cable connection)
• At least 40 MB of free disk space
• For connection between the Nokia 6310i and a PC you need a compatible infrared
port/DLR-3P cable (Windows NT 4 only cable connection)
The Nokia Content Copier supports the following Nokia phones
Nokia 6250/Nokia 7110 Infrared connection/the DLR-3P serial cable
Nokia 5210/Nokia 6500/Nokia 6510/Nokia
8210/Nokia 8310/Nokia 8850/Nokia 8890
Infrared connection
Nokia 6210/Nokia 6310/Nokia 6310i Infrared connection/the DLR-3P serial
cable/Bluetooth