23
1. Select Menu > Messaging > Create message > Audio message. The recorder opens.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number.
4. Select Send, or press the call key.
To open a received audio message, select Play. If more than one message is received, select
View > Play. To listen to the message later, select Exit.
■ Flash messages
Flash messages are text messages that are instantly displayed upon receipt. Flash messages
are not automatically saved.
Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone
number, and write your message.
■ E-mail application
To activate the e-mail settings, select Menu > Messaging > Message settings >
E-mail messages.
To use the e-mail function on your phone, you need a compatible e-mail system.
You may receive the e-mail settings as a configuration message. For more information,
contact your network operator or service provider.
E-mail setup wizard
The e-mail setup wizard starts automatically if no e-mail settings are defined in the phone.
To start the setup wizard for an additional account, select Menu > Messaging and the
existing e-mail account. Select Options > Add mailbox to start the e-mail setup wizard.
Follow the instructions on the display.
The e-mail application requires an internet access point without a proxy. WAP access points
normally include a proxy and do not work with the e-mail application.
Write and send e-mail
You can either write an e-mail message before connecting to the e-mail service, or connect
to the service first, and then write and send your e-mail.
1. Select Menu > Messaging > Create message > E-mail message.
If more than one e-mail account is defined, select the account from which you want to
send the e-mail.
2. Enter the recipient’s e-mail address, the subject, and the e-mail message. To attach a
file, select Options > Insert.
To Next Page
Loading...
