Nokia 6600 - Tuning of the RX Using Phoenix; RX Channel Select Filter Calibration; RX Calibration

NHL-10
RF Troubleshooting CCS Technical Documentation
ISSUE 2 01/2004 COMPANY CONFIDENTIAL 19
Copyright © 2003 Nokia. All Rights Reserved.
Tuning of the RX Using Phoenix
RX Channel Select Filter Calibration
This calibration is calibrating the Baseband filter inside Mjølner ASIC. It is done by internally
measuring a prototype filter, for this reason the calibration is done once, not separately for all
three bands.
• Select Tuning -> RX Channel Select Filter Calibration.
• Press Tune.
RX channel select filter calibration is finished.
RX Calibration
The RX Calibration is used to determine the gain at different gain settings for the front-end and
the Mjølner ASIC and needs to be done in all three bands.
RX-calibration requires an external signal generator.
• Select Tuning -> RX calibration.
• Select band: GSM900.