Copyright © 2004 Nokia. All rights reserved.
Tools
77
Changing the trust settings of an authority certificate
• Scroll to an authority certificate and select Options→ Trust settings. Depending on the
certificate, a list of the applications that can use the selected certificate is shown. For
example:
Application manager / Yes - The certificate is able to certify the origin of new software.
Internet / Yes - The certificate is able to certify e-mail and imaging servers.
Device manager
Go to Menu→
Tools→ Device manager
Device manager allows a third party, such as your service provider, to assist you directly
with phone settings. To allow device management, your phone must establish a connection
and synchronise with the third party’s server. You can start the synchronisation session
from your phone, and you can accept or reject server-initiated synchronisation attempts.
Options in the
Device manager main
view: Start configuration,
New server profile, Edit
profile, Delete, Enable
config. /Disable config.,
View log, Help, and Exit.
This feature is operator dependent and may not be available on all phones. Contact your
service provider for information and availability.
A device manager profile must be defined before you can connect to a server. The third
party who is assisting you can help define the profile settings:
Server name — Display name of the server.
Server ID — Remote device manager server ID.
Server password — Password used in server alerts. Enter the password that must be provided
by the device manager server when synchronising with your phone.
Access point — Internet access point your phone uses to establish the server connection.
Choose from the list of access points defined in your phone.
Host address — Device management server URL.
Port — Device management server port.
User name — Your user name for this profile.
To Next Page
Loading...
