nokia
CONNECTING PEOPLE
PAGE 13 (26) Approved 1.0
CMO Operations & Logistics
DJK
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 22.02.2005
8.) Unscrew the seven Torx Plus
®
size 6 screws in the
shown order. For assembly, the reverse order and a
torque driver with a torque of 25Ncm has to be used.
9.) Lift the UI FRAME ASSY a bit and flip it up carefully.
10.) Open the display connector with SRT-6 carefully.
Take care about the surrounding components.
11.) The Display Shield is locked to the UI-Frame in the
shown places.
12.) Release the Display Shield with a slotted
screwdriver.
13.) Remove the Display Shield.
14.) Protect the Display with a film.
15.) Remove the Display.
Service Manual 6680 Level 1&2 Copyright © 2005 Nokia Corporation. All rights reserved.
To Next Page
Loading...
