Nokia 6700 Slide
RM-576 / RM-577
Service Manual Level 1&2
18 Confidential
| Copyright © 2010
Nokia | All rights reserved
Version 2.0
37) Press out and remove the UI KEYMAT ASSEMBLY. 38) Unscrew the two TORX+ size 4 screws in the
order shown. Do not use them again. Discard them.
39) Carefully move the UI KEYMAT SUPPORT
ASSEMBLY to the direction shown.
40) Unscrew the two TORX+ size 4 screws in the
order shown. Do not use them again. Discard them.
41) Remove the EARPIECE HOUSING ASSY. 42) Use the SS-93 to unlock the locking mechanism
of the LCD connector. While opening the connector,
be careful not to damage the connector.
To Next Page
Loading...
