To stop diverting calls, scroll
to the diverting option, and
select Options
> Deactivate
.
Call barring
Select
> Settings
> Settings
and Phone
> Call
barring.
You can bar the calls that can be made or received with
the
device (network service). To
change the settings, you need
the barring password from your
service provider. Call barring
affects all call types.
Call barring and call diverting
cannot be active at the same
time.
When calls are barred, calls may
be possible to certain official
emergency numbers.
To bar calls, select from the following:
● Outgoing calls
— Prevent making voice calls with your
device.
● Incoming calls
— Prevent incoming calls.
● International calls
— Prevent calling to foreign countries
or regions.
● Incoming calls when roaming
— Prevent incoming calls
when outside your home country.
● International calls except to home country
— Prevent
calls to foreign countries or re
gions, but allow calls to your
home country.
To check the status of voice call barrings, select the barring
option and
Options
> Check status
.
To deactivate all voice call ba
rrings, select a barring option
and Options
> Deactivate all barrings
.
Network settings
Select
> Settings
> Settings
and Phone
> Network
.
To select the network mode, select
Network mode
and Dual
mode
, UMTS
, or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting
UMTS
enables faster data transfer, but
may increase the demand on
battery power and reduce
the battery life. In regions
close to both GSM and UMTS
networks, selecting
Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select
Operator selection
and
Manual to select from available networks, or
Automatic
to
set the device to select the network automatically
.
To set the device to indicate when
it is used in a microcellular
network (MCN), select
Cell info display
> On.
Video sharing
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UM
TS network availability, and
Call functions
© 2009 Nokia. All rights reserved.
26
To change the password used fo
r barring voice and fax calls,
select
Enter the current
code, then the new code twice. The
barring password must
be four
digits long. For details,
contact your service provider.
Options
>
Edit barring
password
.
To Next Page
Loading...
