Copyright2003 Nokia. All rights reserved.
83
• Use SMTP authorisation. If your e-mail service provider requires
authentication for sending e-mails, set the setting to on. You must also
define your SMTP user name and SMTP password.
• SMTP user name. Key in the name that you have obtained from your e-
mail service provider to access your mailbox.
• SMTP password. Key in the password that you want to use to access your
mailbox. If you have not defined a password, you may be asked to define
one when your phone connects to your e-mail account.
• Include signature. Confirm your selection if you want to add a predefined
signature to your e-mail.
• Incoming (POP3/IMAP) server. Key in the e-mail server type for the
incoming e-mail (either POP3 or IMAP4)
• Incoming (POP3/IMAP) port. Key in the port number that you have obtained
from your e-mail service provider.
• POP3/IMAP user name Key in the user name. If you have not defined your
SMTP user name, the e-mail server uses this user name instead.
• POP3/IMAP password. Key in the password. If you have not defined your
SMTP password, the e-mail server uses POP3/IMAP password instead.
• Reply-to address. Key in the e-mail address to which you want the replies
to be sent, if it differs from your e-mail address.
• Incoming server type. Select either POP3 or IMAP4.
To Next Page
Loading...
