L1L2 Service Manual
Co nf id e nt ial | Co p yright © 2011 Nokia | A ll rights reserved
13) Protect the LCD MODUL E and the back side of the
A-C OVER with protec tive film.
14) Use the SS-250 to carefully lift up the LCD
MODULE. Then turn the LCD MODULE over and place it
on top of the A-COVER.
15) Unscrew the three TORX+ size 6 screws in the
order shown. Discard the screws!
16) Use the SS-93 to open the MAIN FLEX F OIL
connector. Be careful not to damage the connector!
17) Use the SS-93 to detach the CHASSIS from the B-
COVER.