Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 345
PoE Information
============================================================
PSE Maximum Power Budget : 60 watts
PSE Power Committed : 0 watts
PSE Power Available : 60 watts
============================================================
PoE Port Information
============================================================
Port-Id PoE Admin/ PoE Oper/ Class
State State
------------------------------------------------------------
1/1/19 Disabled NotApplicable None (0 W)
1/1/20 Disabled NotApplicable None (0 W)
1/1/21 Disabled NotApplicable None (0 W)
1/1/22 Disabled NotApplicable None (0 W)
============================================================
*A:SAST>show>system#
============================================================
PoE Information
============================================================
PSE Maximum Power Budget : 60 watts
PSE Power Consumed : 0 watts
PSE Power Available : 60 watts
============================================================
PoE Port Information
============================================================
Port-Id PoE Admin/ PoE Oper/ Class
State State
------------------------------------------------------------
1/1/19 Enabled Off None (0 W)
1/1/20 Enabled Off None (0 W)
1/1/21 Enabled Off None (0 W)
1/1/22 Enabled Off None (0 W)
============================================================
A:7210SAST>show>system#
internal-loopback-ports
Syntax internal-loopback-ports [detail]
Context show>system
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command displays information about internal loopback ports.
Parameters Detail — keyword - includes application information
Command to display the list of loopback ports assigned to different OAM tools and also the list of
virtual internal port(s) available and its current association.