Nokia 7210 SAS-M Configuration Guide

LAG Hashing Fields used for 7210 SAS-M (Network mode)
Page 58 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Epipe Service:
SAP to SDP
IP traffic: Source and Destination
IP, Source and Destination L4 ports
PBB traffic: BDA, BSA, VLAN
MPLS traffic: Source and
Destination MAC,VLAN
Non-IP traffic: Source and
Destination MAC, EtherType,
VLAN
IP traffic: Source and Destination
IP, Source and Destination L4
ports, Ingress Port-Id.
PBB traffic: BDA, BSA, ISID,
Ingress Port-Id.
MPLS traffic: MPLS label stack
(Two labels deep), Ingress Port-Id.
Non-IP traffic: Source and
Destination MAC, EtherType,
VLAN, Ingress Port-Id.
VPLS Service:
SDP to SAP
Learnt traffic
4.
: Source and
Destination MAC (Outer MACs
inside the payload, just after the
MPLS header)
Unlearnt traffic: Hash-2 and
parameter under hash-2 used.
All traffic (Learnt and Unlearnt)
4.
:
Source and Destination MAC
(Outer MACs inside the payload,
just after the MPLS header),
Ingress Port-Id.
Epipe Service:
SDP to SAP
All traffic
4.
: Source and
Destination MAC (Outer MACs
inside the payload, just after the
MPLS header)
All traffic
4.
: Source and
Destination MAC (Outer MACs
inside the payload, just after the
MPLS header), Ingress Port-Id.
LAG Hashing Fields used for 7210 SAS-M (Network
mode)
Table 8: LAG Hashing mechanism for services configured in Network Mode on 7210
SAS-M devices (Continued)
Traffic direction
(For example SAP
to SDP)
Packet fields used for Hashing
for different traffic types with
hash-1
Packet fields used for Hashing
for different traffic types with
hash-2

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English