LAG Hashing Fields used for 7210 SAS-T Network Mode
Page 70 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Epipe service:
SAP to SAP
IP traffic: Source and Destination IP,
Source and Destination L4 ports
PBB traffic: BDA, BSA, VLAN.
MPLS traffic: Source and Destination
MAC (Outer MACs of the ethernet
packet that encapsulates MPLS packet),
VLAN.
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN.
IP traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress
Port-Id.
PBB traffic: BDA, BSA, ISID, Ingress
Port-Id.
MPLS traffic: Source and Destination
IP, MPLS label stack (Two labels deep),
Ingress Port-Id.
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN, Ingress Port-
Id.
VPLS service:
SAP to SDP
IP traffic (Learnt): Source and
Destination IP, Source and Destination
L4 ports.
IP traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
PBB traffic (Learnt): BDA, BSA, VLAN
PBB traffic (Unlearnt):Hash-2 and
parameter under hash-2 used.
MPLS traffic (Learnt): Source and
Destination MAC, VLAN
MPLS traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
Non-IP traffic (Learnt): Source and
Destination MAC, EtherType, VLAN
Non-IP traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
IP traffic (Learnt and Unlearnt): Source
and Destination IP, Source and
Destination L4 ports, Ingress Port-Id.
PBB traffic (Learnt and Unlearnt): BDA,
BSA, ISID, Ingress Port-Id.
MPLS traffic (Learnt and Unlearnt):
Source and Destination IP, MPLS label
stack (Two labels deep), Ingress Port-Id.
Non-IP traffic (Learnt and Unlearnt):
Source and Destination MAC,
EtherType, VLAN, Ingress Port-Id.
Table 12: LAG Hashing Fields used for 7210 SAS-T Network Mode (Continued)
Services and Traffic
direction (For exam-
ple -SAP to SDP)
Packet fields used for Hashing for dif-
ferent traffic types
With hash-1
Packet fields used for Hashing for dif-
ferent traffic types
With hash-2