Nokia 7210 SAS-M Configuration Guide

Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 71
Epipe service:
SAP to SDP
IP traffic: Source and Destination IP,
Source and Destination L4 ports
PBB traffic: BDA, BSA, VLAN
MPLS traffic: Source and Destination
MAC, VLAN
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN
IP traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress
Port-Id.
PBB traffic: BDA, BSA, ISID, Ingress
Port-Id.
MPLS traffic: Source and Destination
IP, MPLS label stack (Two labels deep),
Ingress Port-Id.
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN, Ingress Port-
Id.
VPLS service:
SDP to SAP
IP traffic (Learnt): Source and
Destination MAC (Outer MACs inside
the payload, just after the MPLS header),
Source and Destination L4 ports, VLAN
PBB traffic (Learnt): Source and
Destination MAC (Outer MACs inside
the payload, just after the MPLS header).
Non-IP traffic (Learnt): Source and
Destination MAC (Outer MACs inside
the payload, just after the MPLS header),
EtherType.
All traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
All traffic (Learnt and Unlearnt): Source
and Destination MAC (Outer MACs
inside the payload, just after the MPLS
header), Ingress Port-Id.
Table 12: LAG Hashing Fields used for 7210 SAS-T Network Mode (Continued)
Services and Traffic
direction (For exam-
ple -SAP to SDP)
Packet fields used for Hashing for dif-
ferent traffic types
With hash-1
Packet fields used for Hashing for dif-
ferent traffic types
With hash-2

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English