Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 83
LAG Hashing Fields used for 7210 SAS-Mxp
Table 14: LAG Hashing mechanism for services configured on 7210 SAS-Mxp devices
Services and Traffic
direction (For example-
SAP to SDP)
Packet fields used for Hashing for
different traffic types with hash-1
Packet fields used for Hashing for dif-
ferent traffic types with hash-2
VPLS and Epipe
Services:
SAP to SAP
Sap Based Egress Scheduling
9
:
All traffic (Learnt and Unlearnt):
Based on LAG SAP parameters:
service-id, lag_index, encap_value,
service_vlan, sap_index, , number of
active ports.
Port Based Egress Scheduling:
All traffic(VPLS Unlearnt)
9
: Based
on LAG SAP parameters: service-id,
lag_index, encap_value, service_vlan,
sap_index, , number of active ports.
All other Traffic(VPLS Learnt and
Epipe):
IP traffic: Source and Destination IP,
Source and Destination L4 ports.
MPLS and Non-IP traffic: Source and
Destination MAC, EtherType,
VLAN.
Sap Based Egress Scheduling
9
:
All traffic (Learnt and Unlearnt): Based
on LAG SAP parameters: service-id,
lag_index, encap_value,
service_vlan, sap_index, , number of
active ports.
Port Based Egress Scheduling:
All traffic(VPLS Unlearnt)
9
: Based on
LAG SAP parameters: service-id,
lag_index, encap_value, service_vlan,
sap_index, , number of active ports.
All other Traffic(VPLS Learnt and
Epipe):
IP traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress
Port-Id
MPLS traffic: MPLS label stack (Two
labels deep), Ingress Port-Id.
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN, Ingress Port-
Id