LAG Hashing Fields used for 7210 SAS-Mxp
Page 84 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
VPLS Service:
SAP to SDP
IP traffic (Learnt): Source and
Destination IP,
Source and Destination L4 ports
IP traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
MPLS traffic (Learnt): Source and
Destination MAC, VLAN
MPLS traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
Non-IP traffic (Learnt): Source and
Destination MAC, EtherType, VLAN
Non-IP traffic (Unlearnt): Hash-2 and
parameter under hash-2 used.
IP traffic (Learnt and Unlearnt): Source
and Destination IP,
Source and Destination L4 ports, Ingress
Port-Id.
MPLS traffic (Learnt and Unlearnt):
MPLS label stack (Two labels deep),
Ingress Port-Id.
Non-IP traffic (Learnt and Unlearnt):
Source and Destination MAC,
EtherType, VLAN, Ingress Port-Id.
Epipe Service:
SAP to SDP
IP traffic: Source and Destination IP,
Source and Destination L4 ports
MPLS traffic: Source and Destination
MAC, VLAN
Non-IP traffic: Source and
Destination MAC, EtherType, VLAN
IP traffic: Source and Destination IP,
Source and Destination L4 ports, Ingress
Port-Id.
MPLS traffic: MPLS label stack (Two
labels deep), Ingress Port-Id.
Non-IP traffic: Source and Destination
MAC, EtherType, VLAN, Ingress Port-
Id.
Table 14: LAG Hashing mechanism for services configured on 7210 SAS-Mxp devices (Continued)
Services and Traffic
direction (For example-
SAP to SDP)
Packet fields used for Hashing for
different traffic types with hash-1
Packet fields used for Hashing for dif-
ferent traffic types with hash-2