nokia
CONNECTING PEOPLE
PAGE 17 (27) Approved 1.0
NMP/CMO Sales and Marketing Customer Care EMEA
DJk
Technical Services, Repair Concepts CONFIDENTIAL 24.11.2004
21.) Turn over the C-Cover Assy carefully. Do not
damage the Flex Assy.
22.) Open the Display Connector carefully by using
the SRT-6.
23.) Release the Engine Module by bending slightly
both plastic battery guides of the D-Cover.
24.) Remove the Engine Module from the D-Cover.
For assembly only!
Put the Engine Module onto the Pogo Pins
of the D-Cover.
For assembly only!
Place the Engine Module into the clamps of the D-Cover
by pressing it slightly.
25.) Put the Engine Module into the soldering jig.
26.) Use the SRT-10 to release the VGA Camera.
Service Manual 7280 Level 3 Copyright 2004 © Nokia Corporation
To Next Page
Loading...
