SMS e-mail function. To use the e-mail function on your device, you need a
compatible e-mail system.
You can write, send, and read e-mail with your device. Your device supports
POP3 and IMAP4 e-mail servers. This application does not support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain a new
e-mail account or use your current account. To check the availability and the
settings of your e-mail account, contact your e-mail service provider.
You may receive the e-mail configuration settings as a configuration message.
See "Configuration setting service," p. 12.
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See "E-mail messages," p. 43.
E-mail setup wizard
The e-mail setup wizard starts automatically if no e-mail settings are defined
in the phone, or to start the setting wizard , select Menu > Messaging > E-
mail > Options > Add mailbox > E-mail setup wizard
To enter the settings manually, select Menu > Messaging > E-mail >
Options > Add mailbox > Create manually.
The e-mail application requires an internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > Create message > E-mail message.
2. If more than one e-mail account is defined, select the account from which
you want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail
message. To attach a file, select the Insert button and from the options.
Messaging
32
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-431D2638-1BD0-45C5-83AF-C38B84F5117C.20070514141826837.en1179142435164/en/1/
GUID-0114949A-2FD0-4027-894A-63EEE9257447.xml Page 32 May 14, 2007 2:35:18 PM