17
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
7500 RM-249 / RM250
Page (18) ISSUE 2
Service Manual Level 1&2
7. Check the correct position of the UI-SHIELD.
8. Always use a new FLEX SHIELDING LID ASSY and t it as shown.
9. Avoid damaging the switch when inserting the ENGINE
MODULE into the B-COVER.
10. Ensure that all spring contacts are in a good condition before
tting the A-COVER.
11. Tighten the four screws to the torque of 21Ncm in the
order shown.
12. Insert the two new screws and tighten them to the torque of
21Ncm in the order shown.
To Next Page
Loading...
