33
Settings
SIM card. To select the USIM card language, select SIM language. To set a
language for the voice playback, select Recognition lang..
Memory status — to view the amount of used and available phone memory
Automatic keyguard — See “Access codes,” p. 10.
Security keyguard — See “Access codes,” p. 10.
Sensor settings — to adjust the sensor settings on your phone
Voice recognition — See “Enhanced voice dialling,” p. 18.
Flight query — See “Flight profile,” p. 17.
Welcome note — to write the note that is shown when the phone is switched on
Phone updates — to update your phone software if there is an update available
Network mode — to select dual mode (UMTS or GSM). You cannot access this
option during an active call.
Operator selection > Automatic — to set the phone to automatically select one of
the cellular networks available in your area. With Manual you can select a
network that has a roaming agreement with your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a tone when it is switched on
■ Enhancements
This menu or the following options are shown if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement and, depending
on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Menu > Settings > Tones > Incoming call alert is set to Beep
once or Off, automatic answer is off.
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. Your service provider may also send you these settings as a
configuration message.
Select Menu > Settings > Configuration and from the following options:
To Next Page
Loading...
