Nokia 9110 Communicator
26.01.99
Copyright 1995 – 1998 Nokia. All right reserved.
1(4)
DIGITAL CAMERA CONNECTIVITY WITH NOKIA 9110
COMMUNICATOR
See the user’s manual of your digital camera to see how to activate the image transfer from the
camera. The digital camera has to support Ir Tran-P (infrared transfer protocol).
Receiving an image from a Digital Camera
To transfer (copy) the images from the camera, start Digital camera connectivity software in
communicator’s System application. Then press Image list from right side of the display. The list
of contents of the Downloaded files folder is shown. All files that do not have UPF and JPEG
extensions are dimmed.
Now you can transfer selected images to your communicator by pressing Receive from right
side of the display.
Note: Remember to activate the sending also from your digital camera at the same time when
pressing Receive from the communicator side.
Viewing the image & other menu functions
After the transfer you’ll have image .UPF file in your image list. The images are saved
automatically under downloaded files folder in the communicator. You can view the .UPF image
in your communicator but to be able to view it with PC, the image has to be converted into
.JPEG format. To convert the image into .JPEG format press the communicator Menu button on
left upper corner next to the 9110 screen. choose Convert to JPEG (using the arrow keys of the
communicator) and press Ok. You can also rename the image by pressing Rename from right
side of the display. If you want to delete the image press the communicator Menu button on left
upper corner next to the 9110 screen and choose Delete (using the arrow keys of the
communicator) and press Ok.
To Next Page
Need help?
General
