Copyright. 1998. Nokia Mobile Phones. 2(4)
To transfer the images to your PC, you can use the file transfer of the PC Suite connectivity
software installed in your PC (included in the sales package). Read the instructions how to use
the connectivity software from the user’s manual of the 9110.
Sending an image to another IrTran-P device
Digital camera connectivity allows you to send an image to another device that supports the IrTran-P
protocol.
Select the UPF image using the up and down arrow keys on the communicator from the image
list. Start the receiving function on the IrTran-P device. Then press Send on the right side of
the communicator’s display. After the connection is established, the image is transferred
(copied).
Note that the image has to be in .UPF format in the image list. If the image is other than .UPF
format, the send button is dimmed.
Sending an image as an email attachment, by fax or via FTP
The UPF image format is for sending and receiving from devices that support IrTran-P. When
sending an image from the communicator to another location, for example as an email
attachment, send in JPEG format. This will allow a colleague of friend to easily view the file,
using for example, Microsoft Internet Browser, Netscape Navigator or the Imaging application in
NT4.0.
See the user’s manual to see how to install and use the FTP software.
Sending image as an email attachment:
First write the email and choose Recipient (or enter address). Then press Attachment from the
right side of the display, then press Add and choose the downloaded files folder. Select the
image from the list. After you have selected the image(s) you can see them in the list of
attachments. Then press Close and now you can send the mail by pressing Send from the right
side of the display
To Next Page
Loading...
Need help?
General
