6
6
Pair and connect the headset
Before using the headset, you
must pair and connect it with a
compatible phone.
1. Ensure that your phone is on
and the headset is off.
2. Press and hold the power key
(for about 5 seconds) until the
green indicator light starts to
flash quickly.
3. Within about 3 minutes,
activate the Bluetooth feature
on the phone, and set it to
search for Bluetooth devices.
4. Select the headset from the list
of found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your phone. In some
phones, you may need to make
the connection separately after
pairing.
When the headset is connected to
your phone and is ready for use,
the green indicator light flashes
about every 5 seconds.
Basic use
Place the headset on the ear
The headset is ready to be used on
the left ear. To use the headset on
the right ear, rotate the earloop so
that it is to the right of the Nokia
logo (11 and 12).
Slide the earloop behind your ear
(9), and gently push the earpiece
against your ear. Carefully bend
© 2008-2009 Nokia. All rights reserved.
To Next Page
Loading...
