Check with the manufacturers of other devices to determine their compatibility with
this device.
Get started
Keys and parts
1 Charger connector
2 Volume knob and indicator light
3 Microphone
4 Rewind key
5 Multifunction key
6 Fast-forward key
7 Play/Pause key
8 Audio connector (3.5 mm)
9 Clip
Charge the battery
Before using the headset, you must charge the battery.
When you unplug a charger, hold and pull the plug, not the cord.
1 Connect the charger to a wall outlet.
2 Connect the charger cable to the charger connector on the headset. The red indicator
light turns green when the battery is fully charged.
3 Disconnect the charger from the headset, then from the wall outlet.
The fully charged battery has power for up to 7 hours of talk time, up to 6 hours of music
playing time, or up to 120 hours of standby time.
When the battery charge is low, the headset beeps every 5 minutes and the red indicator
light flashes. When the battery is charging, the red indicator light is on.
3
To Next Page
Loading...
