© 2008 Nokia. All rights reserved. 7
Calls
To make a call, use your phone in
the normal way when the headset
is connected to it.
To redial the number you last
called (if your phone supports this
feature with the headset), when
no call is in progress, press the
multifunction key twice.
To activate voice dialling (if your
phone supports this feature with
the headset), when no call is in
progress, press and hold the
multifunction key for about 2
seconds. Proceed as described in
the phone user guide.
To answer or end a call, press the
multifunction key. To reject a call,
press this key twice.
To adjust the volume during a call,
slide the volume key up or down.
To mute or unmute the
microphone during a call, briefly
press the middle of the volume
key.
To switch a call from the headset
to a compatible phone, press and
hold the multifunction key for
about 5 seconds (the headset
switches off). To switch the call
back to the headset, press the
multifunction key for about 2
seconds (the headset switches on).
Clear settings or reset
To delete the pairings from the
headset or reset the headset,
switch off the headset, and press
and hold the multifunction key for
over 8 seconds. The headset beeps
twice, and the red and green
indicator lights alternate 5 times.
To Next Page
Loading...
