0694408 BH-214 Stereo Bluetooth Headset EN (English type label)
0694409 BH-214 Stereo Bluetooth Headset CN (Chinese type lable)
0694410 BH-214 Stereo Bluetooth Headset PT (Portuguese type label)
0694814 BH-214 Stereo Bluetooth Headset Dark EN (English type label)
0694848 BH-214 Stereo Bluetooth Headset Dark CN (Chinese type label)
0694849 BH-214 Stereo Bluetooth Headset (dark) PT (Portuguese type label)
0694414 HS-44 Stereo Headphones (white/b-grey) EN (English type label)
0694415 HS-44 Stereo Headphones (white/b-grey) CN (Chinese type label)
0694297 HS-44 Stereo Headphones Black EN (English type label)
0694298 HS-44 Stereo Headphones Black CN (Chinese type label)
Testing
Testing Testing
Testing Procedure
ProcedureProcedure
Procedure
In order to avoid unnecessary warranty swaps, a faulty product must
mustmust
must be tested according to the procedure
described below before swapping. Purpose is not to test everything but suspected functionality. Follow the steps
in below described order.
PREPARATIONS
PREPARATIONSPREPARATIONS
PREPARATIONS
Connect the potentially broken headset to a compatible phone and verify the functionality. Confirm the
suspected malfunction with a working headset to avoid unnecessary swapping.
• Working Nokia Bluetooth phone (Nokia 6230i or equivalent), the phone
the phonethe phone
the phone
• Working Nokia Charger (AC-3, AC-4, AC-5, AC-8 or DC-4, DC-9 ), the charger
the chargerthe charger
the charger
• Working headset, the known working product
the known working productthe known working product
the known working product
• Headset in question, the questioned product
the questioned productthe questioned product
the questioned product
• Arrange of out going call or in coming call may needed
• Confirm also the functionality of the phone, the charger and the working unit
Note!
Note!Note!
Note! Purpose is not to test everything but suspected functionality.
The headset contains the following parts:
1. 3.5 mm audio connector for headphones
2. Microphone
3. Power key
4. Indicator light
5. Answer/End key
6. Backward key
7. Play/Pause key
8. Forward key
9. Clip
10. Charger connector
11. Volume up key
12. Volume down key
Visual inspection
Visual inspectionVisual inspection
Visual inspection
(First confirmation)
(First confirmation)(First confirmation)
(First confirmation)
• Inspect the headset for damage caused by user, such as cracks, submerged or deformation of casing.
SW Freeze Evalua
SW Freeze EvaluaSW Freeze Evalua
SW Freeze Evaluation (First confirmation)
tion (First confirmation) tion (First confirmation)
tion (First confirmation)
same as
same as same as
same as Hardware Reset
Hardware ResetHardware Reset
Hardware Reset
Try HW_Reset to avoid SW freeze headsets firstly.
• Press and hold Power button.
• Plug the charger in.
• Once done, proceed to other function evaluations if needed.