10
Copyright © 2010 Nokia. All rights reserved.
the clip or cradle. Proceed as
described in the user guide of the
mobile device.
To answer a call, remove the
headset from the clip or cradle. If
the headset is not in the clip or
cradle, press the multifunction key.
To reject a call, press the
multifunction key twice, or place
the headset into the clip or cradle.
To end a call, place the headset into
the clip or cradle, or press the
multifunction key when the headset
is not in the clip or cradle.
To switch a call between the
headset and a compatible
connected device, press and hold
the multifunction key for about 2
seconds.
Connect to two devices
The headset can be connected to
two devices at the same time.
Pair and connect to two devices
To pair the headset with two
devices, switch on the headset,
activate pairing mode, and pair it
with the first device. Switch off the
headset, activate pairing mode, and
pair it with the second device.
To connect the headset to the two
devices, switch the headset off and
back on.
Handle calls
If the headset can connect to two
devices at the same time and you
use redialling or voice dialling, the
call is made on the device that you
last used to make a call when the
headset was connected to it.
To answer a call on one connected
device and end the active call on the
other device, press the
multifunction key.
To Next Page
Loading...
