ENGLISH
Calls
To make a call, use your mobile device
in the normal way when the headset is
connected to it.
To redial the number you last called (if
your mobile device supports this
feature with the headset), when no
call is in progress, press the answer/
end key twice when the earpiece is not
in the storage slot.
To activate voice dialling (if your
mobile device supports this feature
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds when the
earpiece is not in the storage slot.
Proceed as described in the user guide
of the mobile device.
To answer a call, remove the earpiece
from the storage slot. The headset
automatically switches on, connects
to your device, and answers the call. If
the earpiece is not in the storage slot,
press the answer/end key. To reject a
call, press the answer/end key twice,
or place the earpiece into the storage
slot.
To end a call, place the earpiece into
the storage slot, or press the answer/
end key when the earpiece is not in
the storage slot.
To mute the microphone, slide the
mute key towards the microphone (8).
The red area of the mute switch is
displayed. To unmute the microphone,
slide the mute key to the opposite
direction.
To switch a call between the headset
and a compatible connected device,
press and hold the answer/end key for
about 2 seconds.
Connect to two devices
The headset can be connected to two
devices at the same time.
To Next Page
Loading...
