8
8 © 2010 Nokia. All rights reserved.
If the headset is not connected to
a device within about 30 minutes,
it switches off automatically.
Pair and connect the headset
Before using the headset, you
must pair and connect it to a
compatible device.
You can pair the headset with up
to eight devices, but you can
connect it to a maximum of two
devices at a time.
To pair and connect the headset to
your device if the device supports
NFC, make sure the headset is off
and NFC is activated in the device,
and touch the NFC area of the
device with the NFC area of the
headset.
To pair and connect the headset to
your device if the device does not
support NFC:
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode,
and the blue indicator light
starts to flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off, and press and
hold the multifunction key for
about 5 seconds until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes,
activate Bluetooth on your
device, and set it to search for
Bluetooth devices. For details,
see the user guide of your
mobile device.
To Next Page
Loading...
