Get started
8
1. Connect the charger to a wall outlet.
2. Connect the charger to the headset (7). The indicator light is
continuously displayed during charging. If charging does not start,
disconnect the charger, plug it in again, and retry. Charging the
battery fully may take up to 2 hours.
3. When the battery is fully charged, the indicator light turns off.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 7 hours of talk-time or up to
220 hours of standby time. However, the talk and standby times may vary
when used with different mobile phones or other compatible Bluetooth
devices, usage settings, usage styles, and environments.
When battery power is low, the indicator light flashes fast.
■ Switch the headset on or off
To switch on, press and hold the multifunction key until the indicator
light turns on and the headset beeps.
To switch off, press and hold the multifunction key until the indicator
light rapidly flashes four times and then turns off.
■ Pair the headset
1. When the headset is off, press and hold the multifunction key until
the indicator light is continuously displayed.
2. Switch on your compatible phone.
To Next Page
Loading...
