ENGLISH
To mute or unmute the microphone
during a call, press the volume key. The
headset beeps, and a related icon is
displayed on your device (if supported
by the device).
To switch a call between the headset
and a compatible connected device,
press and hold the answer/end key for
about 2 seconds.
Manage two calls
To manage two calls at the same time,
your mobile device must support the
Bluetooth Hands-Free Profile 1.5, and
call waiting must be activated in the
device. Call waiting is a network
service and is available when the
headset is connected to only one
device.
To answer a waiting call and end the
active call, press the answer/end key.
To answer a waiting call and put the
active call on hold, press and hold the
answer/end key for about 2 seconds.
To end the active call and make the
call on hold active, press the answer/
end key.
To switch between the active call and
the call on hold, press and hold the
answer/end key for about 2 seconds.
Turn lights on or off
By default, the indicator lights are
shown in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a mobile
device), press and hold the answer/
end key, and slide and hold the volume
key down for about 5 seconds when
the headset is connected to a device.
The yellow indicator light flashes
once.
To Next Page
Loading...
