When you are listening to music
with bass or treble active, the
indicator light of the respective
key blinks.
Settings
Switch the indicator lights
off
When the headset is connected to
a device, press and hold
and
the volume down key for 5
seconds. The yellow indicator
light flashes once. Some indicator
lights may still be shown, for
example, when the battery charge
is low.
Switch the lights back on —
Press and hold
and the
volume up key for 5 seconds. The
green indicator light flashes once.
Clear the pairings
Switch the headset off, and press
and hold
for 9 seconds.
The headset beeps twice, and the
red and green indicator lights
alternate. After the settings are
cleared, pairing mode is activated.
Troubleshooting
Cannot connect the headset to a
compatible device? Make sure
that the headset is charged,
switched on, and paired with the
device.
Did the headset stop functioning
even though it is charged? Plug
the charger into a wall outlet, and
while you press and hold
,
connect the headset to the
charger.
ENGLISH
Cyan
To Next Page
Loading...
