4
Copyright © 2009 Nokia. All rights reserved.
Get started
The headset contains the following
parts shown on the title page:
volume key (1), sliding boom (2),
earpiece (3), indicator light (4),
power key (5), charger connector
(6), mute key (7), answer/end key
(8), and microphones (9).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Compatible chargers
This device is intended for use when
supplied with power from the
following chargers: AC-6 and DC-6.
The exact charger model number
may vary depending on the type of
plug. The plug variant is identified
by one of the following: E, EB, X, AR,
U, A, C, or UB.
Charge the battery
1. Connect the charger to a wall
outlet.
2. Lift the cover of the charger
connector, and connect the
charger cable to it (10). The red
indicator light is displayed
during charging.
Charging the battery fully may
take up 35 minutes with the AC-
6 charger. Charging the battery
with the AC-6 charger for 15
minutes provides up to 5 hours
of talk time.
3. When the battery is fully
charged, the green indicator
light is displayed. Disconnect the
charger from the headset, then
from the wall outlet. Push the
cover over the charger
connector.
To Next Page
Loading...
