6
Copyright © 2009 Nokia. All rights reserved.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect
it to only up to two devices at a
time.
1. Ensure that your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode, and
the blue indicator light starts to
flash quickly.
If the headset has been
previously paired with a device,
ensure that the headset is
switched off, and press and hold
the power key for about 5
seconds until the blue indicator
light starts to flash quickly.
3. Activate the Bluetooth feature
on your device, and set it to
search for Bluetooth devices. For
details, see the user guide of your
device.
4. Select the headset from the list
of found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to
at least one device and is ready for
use, the blue indicator light flashes
slowly.
To manually connect the headset to
one or two last used devices, press
and hold the answer/end key for
about 2 seconds (when no devices
To Next Page
Loading...
Need help?
General
Weight and Dimensions
