Nokia C02 User Guide
2. Slide the nano-SIM in slot 1 with the
contact area face down.
3. If you have a dual-SIM phone, slide the
second SIM in slot 2.
4. If you have a memory card, remove the
battery, then slide the memory card in the
memory card slot.
5. Put back the battery.
6. Put the back cover back on.
Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for use with this device. Incompatible cards may
damage both the card and the device and corrupt data stored on the card.
Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are
2 IMEI codes on the label, you have a dual-SIM phone.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store
and use the device with any covers attached.
Important: Do not remove the memory card when an app is using it. Doing so may damage
the memory card and the device and corrupt data stored on the card.
Tip: Use a fast microSD memory card (up to 256 GB) from a well-known manufacturer.
CHARGE YOUR PHONE
Charge the battery
1. Plug a compatible charger into a power socket.
© 2023 HMD Global Oy. All rights reserved. 8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
